Den-Mat Sapphire Manual del operador descargar pdf (Pagina 22)

The Den-Mat

Holdings, LLC Sapphire STM 3W Diode

Laser Speciﬁcation

STM Diode Laser Unit:

Style: Plug-In accessory for Sapphire

Plus System

Laser Classiﬁcation: Laser diode Class 4 laser device (per IEC 60825)

Wavelength: 808 nm ±5 nm

Beam Divergence: 9° ± 1°

Power Range: 100 mW to 3 W

Hertz rate (Pulsed): ﬁxed 4 Hz

Pulse Duration: ﬁxed 0.125 seconds

Duty Cycle: Pulsed mode 50%, ﬁxed

Continuous wave 100%

Aiming Beam: 640 (± 10)nm, 0.4 mW maximum output

Audible signal: Yes

Visual signal: Yes

Power Supply: Derived from Sapphire Plus System

Auxiliary Power: 5 VDC supplied from

110 - 120 VAC @ 60 Hz or

220 – 240 VAC @ 50 Hz Power Adapter

Complies with:

IEC 60601-1-2, IEC 60601-1, IEC 60601-2-22 and IEC 60825-1; 21 CFR 1040.10 and 1040.11 with

permissible deviations pursuant to Laser Notice 50, dated July 21, 2001.

Handpiece:

Length: 5.20 in

Diameter: 0.65 in

Tip removal: Manual friction-ﬁt

Activation method: Electrical contact on handpiece/ Footswitch control (optional)

Power cable: 72 in X 0.26 in

Aseptic care: Wipe with appropriate disinfecting solution

Tips:

Type: Removable, Single-Use Disposable

Material: Fused Silica, coated

Size: 400 μm X 2 in.

Style: Fiber

1 2 ... 17 18 19 20 21 22 23 24

Sin comentarios

Den-Mat Sapphire Manual del operador Pagina 22